Woodworking Tools, Materials and Projects
For The Do It Yourself Crowd
Sort eBay listings by:
Highest Priced-----Lowest Priced-----Auctions Ending Soonest-----Newly Listed

EXOTIC WOOD JUMBO AFRICAN MAHOGANY KNIFE SCALES BLANKS
EXOTIC WOOD JUMBO AFRICAN MAHOGANY KNIFE SCALES BLANKS
 Price: $1.99 (0 Bids)
Sale Ends: 3d 4h 33m
Honduran Mahogany Lumber
Honduran Mahogany Lumber
 Price: $0.99 (1 Bids)
Sale Ends: 2d 22h 48m
Honduran Mahogany Lumber
Honduran Mahogany Lumber
 Price: $0.99 (0 Bids)
Sale Ends: 4d 5h 42m
Honduran Mahogany Lumber
Honduran Mahogany Lumber
 Price: $0.99 (0 Bids)
Sale Ends: 5d 5h 42m
EXOTIC WOOD LUMBER : 5 4 GENUINE MAHOGANY
EXOTIC WOOD LUMBER : 5 4 GENUINE MAHOGANY
 Price: $2.34 (0 Bids)
Sale Ends: 22h 38m
FULL BOX OF AFRICAN & HONDURAN MAHOGANY CRAFTWOODS
FULL BOX OF AFRICAN & HONDURAN MAHOGANY CRAFTWOODS
 Price: $0.99 (1 Bids)
Sale Ends: 3d 11m
EXOTIC WOOD LUMBER : SANTOS MAHOGANY
EXOTIC WOOD LUMBER : SANTOS MAHOGANY
 Price: $2.00 (0 Bids)
Sale Ends: 1d 3h 38m
EXOTIC WOOD LUMBER : 6 4 AFRICAN MAHOGANY
EXOTIC WOOD LUMBER : 6 4 AFRICAN MAHOGANY
 Price: $1.88 (0 Bids)
Sale Ends: 2d 22h 38m
Mahogany Guitar Luthier Lumber
Mahogany Guitar Luthier Lumber
 Price: $1.04 (2 Bids)
Sale Ends: 3d 3h 30m
EXOTIC WOOD LUMBER : 16 4 GENUINE MAHOGANY
EXOTIC WOOD LUMBER : 16 4 GENUINE MAHOGANY
 Price: $1.00 (1 Bids)
Sale Ends: 1d 22h 38m
EXOTIC WOOD LUMBER : 8 4 AFRICAN MAHOGANY
EXOTIC WOOD LUMBER : 8 4 AFRICAN MAHOGANY
 Price: $2.12 (1 Bids)
Sale Ends: 22h 38m
Fiddleback mahogany wood knife scales, stabilized, rare
Fiddleback mahogany wood knife scales, stabilized, rare
 Buy It Now: $8.99
Sale Ends: 5d 29m
EXOTIC WOOD LUMBER : AFRICAN MAHOGANY SURFACE TO 3 4"
EXOTIC WOOD LUMBER : AFRICAN MAHOGANY SURFACE TO 3 4"
 Price: $3.79 (0 Bids)
Sale Ends: 3h 38m
EXOTIC WOOD LUMBER : GENUINE MAHOGANY
EXOTIC WOOD LUMBER : GENUINE MAHOGANY
 Price: $2.00 (1 Bids)
Sale Ends: 1d 22h 38m
EXOTIC WOOD LUMBER : 10 4 AFRICAN MAHOGANY
EXOTIC WOOD LUMBER : 10 4 AFRICAN MAHOGANY
 Price: $1.00 (1 Bids)
Sale Ends: 2d 3h 38m
EXOTIC WOOD LUMBER : 10 4 AFRICAN MAHOGANY
EXOTIC WOOD LUMBER : 10 4 AFRICAN MAHOGANY
 Price: $1.00 (1 Bids)
Sale Ends: 2d 22h 38m
EXOTIC WOOD LUMBER : GENUINE MAHOGANY
EXOTIC WOOD LUMBER : GENUINE MAHOGANY
 Price: $2.25 (2 Bids)
Sale Ends: 3h 38m
13 PIECES OF MAHOGANY WOOD IN USPS FLAT RATE BOX ML-24
13 PIECES OF MAHOGANY WOOD IN USPS FLAT RATE BOX ML-24
 Buy It Now: $7.50
Sale Ends: 1d 7h 11m
EXOTIC WOOD LUMBER : 8 4 AFRICAN MAHOGANY
EXOTIC WOOD LUMBER : 8 4 AFRICAN MAHOGANY
 Price: $7.71 (3 Bids)
Sale Ends: 3h 38m
19 Mahogany Small Boards for Woodworking or Crafts
19 Mahogany Small Boards for Woodworking or Crafts
 Buy It Now: $9.99
Sale Ends: 25d 20h 7m

LumberJocks.com

Woodworking Projects at LumberJocks.com


Horizontal Drill
by Karson
1 hour ago

I needed a horizontal drill for making the Vintage sleighs The brass escutcheon pins that were used to hold the pieces together needed to be drilled into the middle of 1/4” wood and to not blow out the side. The pins are about 10 thousands bigger than a 1/16” drill bit. So I drill the hole and then put in the pin.

This type jig is used when making round Shaker Boxes to drill the holes very close to the edge and to allow the toothpick dowel to be put in.

It’s 1/2” Baltic birch with a 1 7/8” hole that fits the collar on the drill body. I use stacks of wood and shims to get the drill bit to the correct height that I need to do the drilling. You then push the wood in to the required depth.

The block to hold the drill is glued and screwed. The block that holds it in the vise is also glued and screwed.



Hamilton Clock
by pashley
1 hour ago

A little something for my mother for Christmas. Cherry with shellac and wax.



Wellington Clock
by pashley
1 hour ago

A Christmas present for a family friend. About 14” high. Quartersawn white oak, with Paduak highlights. Shellac and wax finish. My own design, including the clock face.

How I made the clock face: I drew it up in Photoshop, at 300dpi. I printed it out on my nice inkjet printer using HP’s Archival quality thick-stock paper. I was pleased with the result.



Bandsaw Sliding Table Jig.
by Karson
1 hour ago

While making the Vintage Sleighs I needed a way to hold small pieces and to cut them safely.

So I made this jig.

Put a runner for the slot on the bottom.

Put the fence on at 90 deg. and use a block of wood clamped at the back to control the depth of cut.

In use cutting some frame blocks for the sleigh. The slots would be a 14 deg dado. I used the bandsaw and chisel.

It’s made with Baltic birch ply. 1/2” thick.



Vintage Sleigh for Mason Dixon Holiday Dinner
by Karson
1 hour ago

I made these sleighs for a door prize for the holiday dinner tonight. I got done with 4 hours to spare.

The Blog on it’s construction and history is here.

My wife made the floral decorations for the sleighs.

The assembled sleighs.

I’ve got pieces for about 12 of them so I’ll be busy for a while.



Tracery Fretwork
by jwarner75
1 hour ago

I’m in the process of finishing this up, I’ve started it last night.

I had a Small problem with a Nick on it, I think if I hang it on the wall it will become unnoticable.

Tech Specs:

Materials: 1/4” Baltic Birch Plywood
Time: Few hours so far
Difficulty: Advanced
Blades: FD-TC#5

Hope you like the pictures, they are laying down, cause of the post to my blog earlier this morning, was to show the mishap I’ve done to my project because I wasn’t paying attention.

Have a Look

Handi